Phone: 01744 754 127

Loading...

SCM Minimax Model ME40 TR Edgebander with Pre-Milling & Corner Rounding

£29,950.00

Incorporating each impressive feature of the SCM ME40TR + Corner rounding unit, the SCM Minimax Model ME40 TR Edgebander with Pre-Milling & Corner Rounding features the same pre-milling unit but with an additional corner rounding unit for further versatility and advanced functionality.

For boosted productivity, the 9m/min panel feed speed makes for more stable, steadier machining and minimises the chances of any errors or defects within the feeding process. The panel position can be monitored via the encoder which allows for a greater degree of control for the operator.

Thanks to the simple usability and centralized management of the control panel, all adjustments, settings and functions can be handled with ease and all contribute to granting the operator an excellent degree of control over the machine. This makes for an advanced machining process where the operator is capable of performing demanding and complex work with greater ease. Additionally, the control panel assists the operator through maintenance, cleaning, diagnostics and more.

The glue is applied evenly with haste and is prevented from burning thanks to the automatic decrease of temperature when the machine temporarily halts. The addition of a self-lubricating glue pot makes for more efficient operation as the need for manual lubrication is eliminated. Accompanied by electrical resistance, the glue spreading roller provides a uniform, balanced glue spread at the maximum working temperature.

With the pre-milling unit, the machining process has been greatly enhanced making for an excellent, refined finished product fit for the most demanding of consumers.

And now, with the addition of a corner rounding unit, the functionality of this series of edgebander is as advanced as ever. The corners of your workpiece can be processed in a highly effective way that will leave flawless results.

Part Exchange

If you are looking to swap out your older machine for a brand new model, fill in this short form.

Finance Enquiry

Finance available on this machine working alongside our partner Close Brothers Asset Finance.

IMPORTANT

Technical Specifications

Specifications
Make
Model
Pre Milling Unit
Minimum Panel Length
Edge Thickness
Minimum Panel Thickess
End Trim
Motor Power
Corner Rounded
Scraping
Specifications
Bander Type
Feed Speed
Maximum Edge Thickness
Minimum Edge Thickness
Top/bottom Trim
Buffing
Dust Outlet Size
Voltage/Phase
Weight
Dimensions

FEATURES

Machines Features

Loading...

Specifications

PRE-MILLING
CORNER ROUNDING
SEPARATE END CUTTING UNIT FOR TRIMMING SOLID WOODS
AUTOMATIC LOADING DEVICE FOR EDGES IN STRIPS
GLUE POT
IN LINE TRIMMING UNIT
BRUSHING UNIT
RAPID GLUE POT SUBSTITUTION
PANEL HEATING DEVICE
ANTI ADHESIVE UNIT
SPRAY MIST DEVICE FOR EDGE FINISHING

GENERAL FEATURES

– control panel on machine infeed side
– main frame made of bended and welded steel plates to ensure a high rigidity structure
– top steel presser, complete with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels.
– manual adjustment of top beam with automatic positioning of the operating units according to the selected panel thickness
– numeric indicator of the selected panel thickness
– feed track made of pads coated with high friction rubber fixed on n ¾ industrial chain. Sliding of pads on two guideways, one round and one flat, to ensure straightness of movement and resistance to side loads. Manual pads lubrication
– panel support roller which can be extended on the entire length of the machine
– glue smokes specific exhaust outlet
– safety enclosure
– PLC and 4” graphic display with large and luminous characterse, selection of working language, keyboard with “soft touch” pushbuttons and led light, adjustment and indication of the glue pot temperature encoder positioned on the panel feed track pinion,padlockable main switch and overload protection, emergency pushbutton

High productivity.
9 m/min panel feed speed with track movement for an increased productivity. Monitoring of the panel position by encoder for a total work cycle control.

Perfect edge joint line.
Premilling unt. Panel edge surface without any imperfections before the gluing operation. Utilizes 2 tools with opposing rotation and timed intervention that, through the removal operation, corrects any panel imperfections caused by the saw cutting process and panel storage. The independent exhaust system and the air blowing device removes dust and chips from the panel.
– Wide cutters available as standard feature
– Adjustable stock removal by register, with the numerical readout of the infeed fence.

Simple and intuitive.
Control System. Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

Ideal edge application.
Gluing Unit. The glue is heated rapidly and evenly by the resistances. The automatic lowering of the glue temperature after a temporary halt in production when using the machine avoids burning of the glue. A new innovative system of self-lubrication of the glue pot, allows a more extensive use of the edge banding machine without the necessity of lubrication. Two rollers press the edge banding evenly and efficiently on to the panel edge. The glue spreading roller with electrical resistance inside provides a uniform glue spread and always at the maximum working temperature even on panels at the maximum working height. The rapid unlocking of the glue pot and PU glue pot is available as optional device.

PRE-MILLING UNIT
Complete with 2 diamond tools, 80 mm diameter. It allows a very good panel finish and linearity during pre-machining. It is equipped with independent exhaust hoods and a air blower which cleans the panel from dust and chips.
It is possible to carry vertical adjustments of the tools to use them even in the final sharpening phase.

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM
complete with:
– hot melt glue with quick heat up system and internally Teflon coated to allow an easy glue replacement
– glue application on the panel by means of glue spreading roller
– temperature adjustment of the applied glue integrated in the PLC control
– device for automatic recovery of unused glue
– automatic edge loading system for rolled edges with shear device for 3 mm max. thickness edges
– coil holder plate, 730 mm diameter
– pressing unit with n. 2 edge steel rollers with counterpoised iconicity
– adjustable infeed fence with numeric readout
– automatic lowering of the glue pot temperature after a temporary non-use of the machine
– self-lubrication system of the glue pot

END CUTTING UNIT
with high frequency motor for 90° end cutting of front and rear exceeding edge.

IN-LINE TRIMMING UNIT
with high frequency motors, front rotating copiers and vertical copying discs for an accurate positioning of tools with reference to the cutting point.
The unit is provided with 55,3 mm diameter, combined cutters: the radius part of the cutter is used to trim radius edges (2mm or 3 mm on request) and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters.
The edge thickness is shown by 2 numeric readouts. The unit is equipped with independent exhaust systems.

Special end cutting unit with “radius” function (OPTION)
It is installed in place of the standard end cutting unit, during the process of cutting of the front and rear exceeding edge; it rounds-off the angles of the edge banded panel carrying out a radiused edge.
When edge banding solid wood, the end cutting with “Radius” function, however, will carry out a straight cut.
It is directly controlled from the control panel.
It is complete with:
– no. 1 high frequency motor (0,19 kW – 12.000 rpm)
– no. 1 blade Ø 125 mm Z12
N.B. – It is available only for the me 35t and me 40t
– For an optimal finish, it is advisable to use the pre-milling unit

EDGE SCRAPING UNIT
For the finishing of 2 mm PVC/ABS edges (other thicknesses upon request).
It assures an excellent vibration free finish thanks to its high rigidity structure.
High working precision thanks to the horizontal and vertical copying discs, which assure an accurate positioning of the knives in relation to the cutting point.
Pair of knives included (R= 2mm; other thicknesses upon request).
Manual exclusion of the unit.
N.B. For me 35: for compatibility with other groups,

GLUE SCRAPING UNIT
It eliminates any excess of glue in the joint between panel and edge, improving the panel cleaning.
N.B. For me 35: For compatibility with other groups,

DEVICE FOR PANEL EDGE HEATING
set in the machine before the gluing unit to heat the panels for a better glue sticking, thus optimising the edge banding. The device is particularly useful in case of cold working environments and/or panels stock

SPRAY MIST DEVICE FOR EDGE FINISHING
It is positioned before the glue scraper and/or brushes and improves the panel cleaning and the polishing of the applied edge.

Technical Features ME40 40
– worktable dimensions [mm] 3465 x 710
– worktable height [mm] 875
– thickness of rolled edges [mm] 0,4 ÷ 3
– thickness of edges in strips [mm] fino a 5
– min. ÷ max. panel height [mm] 8 ÷ 50
– min. panel length/width with rolled edges [mm] 190/110
– min. panel length cut only on the front [mm] 120
– feed speed [m/min] 9
– feed motor power S1 [kW] 0,55
– pneumatic operating pressure [bar] 6,5
– exhaust outlet diameter (glue pot) [mm] 80
– no. 2 exhaust outlets diameter (trimming unit) [mm] 60
– no. 2 exhaust outlets diameter (“me 40t” pre-milling unit) [mm] 80
– operating temperature [°C] 20 ÷ 190

Premilling unit :(me 40t):
– motor power S1 [kW] 2,2
– blade rotation speed [rpm] 9.000
– no. 2 diamond cutters Ø 80 mm H=56 Z2
– stock removal [mm] 0,5/1/1,5/2

Glue pot unit:
– motor power S1 [kW] 0,18
– glue capacity [kg] ~ 0,8

End cutting unit:
– motor power S1 [kW] 0,19
– end cutting blade Ø 125 mm Z20
– blade rotation speed [rpm] 12.000

Trimming unit:
– upper/lower motor power S1 [kW] 2 x 0,35
– widia cutters Ø 55,3 mm Z3
– cutters rotation speed [rpm] 12.000
– vertical/horizontal copying devices rotating

 

Additional Information

Product Video

 

PRODUCTS

Featured Products

Enquire Today

"*" indicates required fields

Consent*
Do you consent to RJ Woodworking Machinery storing your personal details and contact you?
You can view our privacy policy here: Privacy Policy
This field is for validation purposes and should be left unchanged.

Enquire Today

"*" indicates required fields

Do you have any other products to exchange?*
Do you have any other products to exchange?
Please select the ways you would like to hear from us:

More than 3 products, please phone us.

You can unsubscribe at any time by clicking the link in footer of our emails. For information about our privacy practices, please visit our website.

We use Mailchamp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchamp for processing. Learn more about Mailchimp’s privacy practices here.

FINANCE

Finance Enquiry

"*" indicates required fields

Consent*
RJ Woodworking Machinery acts in partnership with Close Brothers Asset Finance. Close Brothers Asset Finance is a trading style of Close Brothers Limited. Close Brothers Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and Prudential Regulation Authority. Close Brothers Limited is registered in England and Wales (Company number 00195626) and its registered office is 10 Crown Place, London, EC2A 4FT.
Confirmation
I hereby certify that the information contained herein is complete and accurate. This information has been furnished with the understanding that it is to be used to determine the amount and conditions of the credit to be extended. Furthermore, I hereby authorise the financial institutions listed in this credit application to release necessary information to the company for which credit is being applied for in order to verify the information contained herein.

NEW PRODUCT

Special offer While Stocks Last

New SCM Nova Si300 Panel Saw

New SCM Nova Si300 Panel Saw

For professional workshops and demanding craftsmen, the SCM SI300 Nova 3.2m Panel Saw is a powerful and robust machine capable of handling heavy workloads.