Inventair

We supply the full range of Inventair dust extractors, from single-bag units for one machine to six-bag multi-filter systems for a whole workshop. Inventair builds its units in Bridlington, Yorkshire, and every extractor we sell can be delivered and installed by us, with servicing and replacement bags and filters afterwards.

MK and MTFA Ranges

MK units are Inventair’s standard bag extractors. A fan draws waste through your ducting into the unit. Heavier chips and shavings drop into polythene bags, and finer dust is caught by Highglaze Terylene needlefelt filters. Clean air goes back into the workshop, so you don’t lose the heat you’ve paid for. The MK number matches the number of bags, from the MK1 to the MK6.

MTFA units are the multi-filter versions, built for finer dust from MDF and chipboard. They have a larger filter area, swirl baffles that help the bags fill evenly, and an automatic shaker that cleans the filters each time the unit shuts down.

Which Size Do You Need?

Size the extractor for the number of machines running at the same time, not the total number in the workshop.

• One machine: an MK1 or MK2.
• A small joinery shop with two or three machines running together: an MK3 or MK4.
• Several machines, or a lot of MDF and chipboard work: an MK6, or an MTFA unit for the finer dust.

If you’re not sure, send us a list of your machines and their extraction outlet sizes, and we’ll recommend a unit and the ducting to go with it.

Prices

Prices range from under £1,000 for a single-bag MK1 to around £5,000 for the largest MTFA units. See the current prices in the listings below, or browse our full range of dust extractors.