POA
For more information
If you are looking to swap out your older machine for a brand new model, fill in this short form.
Finance available on this machine working alongside our partner One Funding.
IMPORTANT
Specifications | |
|---|---|
Make | |
Model | |
Pre Milling Unit | |
Minimum Panel Length | |
Edge Thickness | |
Minimum Panel Thickess | |
End Trim | |
Motor Power | |
Corner Rounded | |
Scraping |
Specifications | |
|---|---|
Bander Type | |
Feed Speed | |
Maximum Edge Thickness | |
Minimum Edge Thickness | |
Top/bottom Trim | |
Buffing | |
Dust Outlet Size | |
Voltage/Phase | |
Weight | |
Dimensions |
FEATURES
| MACHINING FEATURES FOR FRONT WORKTABLES | ||
| Workpiece cross-section (widthxthickness) | Min. | 38 x 18 mm |
| Max. with 45° cut | 102 x 28 mm | |
| Max. with 0° cut | 150 x 28 mm | |
| Workpiece length | Min. | 100 mm |
| Max. | Not applicable | |
| Tenon dimensions | Length max. | 150 mm |
| Thickness max. | 12,7 mm (1/2″) | |
| Height | 8 ÷ 26 mm | |
| Hole or mortise dimensions | Hole diameter | 3 ÷ 16 mm
(possible interpolation up to 26 mm) |
| Mortise length max. | 150 mm | |
| Mortise thickness | 3 ÷ 16 mm
(possible interpolation up to 26 mm) |
|
| Hole or mortise depth max. | 12,7 mm (1/2″) | |
| “Miter Door” work cycle time min. | 18s (50 frames for cabinet doors/hour) | |
| MACHINING FEATURES FOR REAR WORKTABLE | ||
| Worpiece cross-section (widthxthickness) | Min. | 38 x 18 mm |
| Max. | 150 x 50 mm | |
| Loadable workpiece length | Min. with 2 pressure cylinders | 220 mm |
| Max. | 1250 mm (STD)
1370 mm (OPT) |
|
| Machinable workpiece length for Face Frame | Min. | 220 mm |
| Max. | 1100 mm | |
| Specifications for French Joint | Machinable workpiece
length min. |
220 mm |
| Machinable workpiece
length max. |
760 mm | |
| Notching depth | 8 ÷ 20 mm | |
| Notching angle | 45° | |
| Hole or mortise dimensions | Hole diameter max. | 16 mm (doubling by interpolation) |
| Mortise length max. | 960 mm | |
| Mortise thickness | 3 ÷ 16 mm (doubling by interpolation) | |
| Hole or mortise depth max. | 50 mm | |
| Holes centre-distance max. (in X axis) | 960 mm | |
PRODUCTS
"*" indicates required fields
"*" indicates required fields
FINANCE
"*" indicates required fields
NEW PRODUCT
SCM Centauro R800-RVP210 Bandsaw Resaw
The SCM Centauro R800-RVP210 Bandsaw Resaw is a heavy-duty bandsaw resaw machine composed of solid cast iron wheels, a massive 15kW motor, reliable safety features and a flexible tilting table. The R800 comes as a completely solid, rigid, electric-welded steel structure that will give you years upon years of top-quality service.
